We're Here To Help
Monday-Friday 8am-8pm EST
800-727-7104
Cart (0)
Cart (0)

Complete Safety Suite Package

PACKAGE CONTENTS

  • 29 CFR 1926 Confined Spaces – 3 hour
  • Powered Industrial Trucks and Aerial Lifts – 2 hour
  • Hot Work – 1 hour
  • 29 CFR 1926 Stairways and Ladders – 1 hour
  • Silica Safety – 1 hour
  • Respiratory Protection – 1 hour
  • Hazard Communication – 1 hour
  • Fall Protection – 1 hour
  • Personal Protective Equipment – 1 hour
  • Job Safety Analysis- .5 hour
  • Controlling Hazardous Energy – .5 hour
  • Fire Safety – .5 hour
  • Bloodborne Pathogens – .5 hour
  • Tool Box Talks

 

Confined Spaces 3HR CE

Course Description

29 CFR 1926 – Subpart AA Confined Spaces in Construction sets forth requirements for practices and procedures to protect employees engaged in construction activities at a worksite with one or more confined spaces. Examples of locations where confined spaces may occur include, but are not limited to, the following: Bins; boilers; pits (such as elevator, escalator, pump, valve or other equipment); manholes (such as sewer, storm drain, electrical, communication, or other utility); tanks (such as fuel, chemical, water, or other liquid, solid or gas); incinerators; scrubbers; concrete pier columns; sewers; transformer vaults; heating, ventilation, and air-conditioning (HVAC) ducts; storm drains; water mains; precast concrete and other pre-formed manhole units; drilled shafts; enclosed beams; vessels; digesters; lift stations; cesspools; silos; air receivers; sludge gates; air preheaters; step up transformers; turbines; chillers; bag houses; and/or mixers/reactors.

This course covers:

29 CFR 1926 – Subpart AA – Confined Spaces in Construction

  • 1926.1201 Scope
  • 1926.1202 Definitions
  • 1926.1203 General Requirements
  • 1926.1204 Permit-required Confined Space Program
  • 1926.1205 Permitting Process
  • 1926.1206 Entry Permit
  • 1926.1207 Training
  • 1926.1208 Duties of Authorized Entrants
  • 1926.1209 Duties of Attendants
  • 1926.1210 Duties of Entry Supervisors
  • 1926.1211 Rescue and Emergency Services
  • 1926.1212 Employee Participation
  • 1926.1213 Provision of Documents to Secretary

Final Assessment

Powered Industrial Trucks and Aerial Lifts

Course Description

1. Powered Industrial Trucks (55 Minutes) This video training program covers the basic use of powered industrial trucks (fork lifts), and includes specific requirements regarding proper operation, hazards, inspections and maintenance of these useful, but potentially dangerous vehicles in the workplace.

  • Certification and Training
  • What makes a fork lift different?
  • Inspections
  • Safe Travel Procedures
  • Parking
  • Tipovers
  • Stability Triangle
  • Visibility
  • Ramps and Loading Docks
  • Refueling
  • Picking up a Pallet

2. Aerial Work Platforms of Lifts (45 Minutes) This course highlights standards related certification, fall protection, safety hazards, operation and overall best practices for using aerial lifts or platforms.

  • Purpose and Types
  • Certification
  • Fall Protection
  • Energized Lines and other Hazards
  • Inspections
  • Operating the Lift

Hot Work 1HR CE

Course Description

Hot work is any activity or process that creates flames, generates sparks, or heat, and includes welding, grinding, cutting, brazing etc, and any similar applications producing or using sparks, flame or heat. The risk with hot work is high because it introduces a hazard—an ignition source. This course will focus on the various steps to take to ensure hot work is performed in a safe manner.

  • Hot Work Permit
  • Personal Protective Equipment
  • Fire Watch
  • Tank Storage
  • Hot Work Area
  • Other Common Hazards
  • Hexavalent Chromium

29 CFR 1926 Stairways and Ladders

Course Description

This subpart applies to all stairways and ladders used in construction, alteration, repair (including painting and decorating), and demolition workplaces covered under 29 CFR part 1926, and also sets forth, in specified circumstances, when ladders and stairways are required to be provided.

29 CFR 1926 – Subpart X – Stairways and Ladders Safety:

  • 1926.1050 Scope, Application, and Definitions Applicable to this Subpart
  • 1926.1051 General Requirements
  • 1926.1052 Stairways
  • 1926.1053 Ladders
  • 1926.1060 Training Requirements

Final Assessment

Silica Safety 1HR 

Course Description

Construction workers are exposed to respirable crystalline silica in over 600,000 workplaces each year. OSHA estimates that more than 840,000 of these workers are exposed to silica levels exceeding the Permissible Exposure Limit (PEL). This one-hour course reviews OSHA regulations and the safety codes surrounding silica safety.

  • Introduction to Silica
  • PEL Limits
  • Employer Responsibilities
  • Respiratory Protection
  • Respiratory Protection
  • Exposure Control Methods

 

 Respiratory Protection Course 1HR

Course Description

Respirators protect workers against insufficient oxygen environments, harmful dusts, fogs, smokes, mists, gases, vapors, and sprays. These hazards may cause cancer, lung impairment, diseases, or death. Compliance with the OSHA Respiratory Protection Standard could avert hundreds of deaths and thousands of illnesses annually. This course outlines the types of respirators available, proper fit, and inspection/maintenance requirements.

  • Identifying the hazards
  • Training
  • Medical evaluation questionaire
  • Fit testing
  • Fit check
  • Maintenance
  • Proper storage
  • Cartridges/gaskets
  • Types
    • half-face
    • full-face
  • Correct cartridges for toxin
  • Facial hair

 

 Hazard Communication 1HR

Course Description

In order to ensure chemical safety in the workplace, information about the identities and hazards of the chemicals must be available and understandable to workers. This course will outline employee Right-to-Know information, the Global Harmonizing System, Safety Data Sheets, and labels.

  • Employee Right-to-Know
  • Global Harmonizing System
  • Reading the Label
  • HMIS and NFPA Systems
  • Safety Data Sheets

 Fall Protection Course 1HR

Course Description

Falls are one of the most common types of serious injuries and deaths. Employers are responsible for maintaining a safe working environment, but when fall protection devices are impractical, personal fall protection equipment may be used. This course outlines the standard equipment use, maintenance and inspection requirements for harnesses, lanyards, lifelines, tethers and more.

  • Choosing the right equipment:
  • Positioning devices, rescue/retrieval devices
  • Harnesses
  • Lanyards
  • Anchorage
  • Rescue plans

 Personal Protective Equipment Course 1HR

Course Description

Personal protective equipment, commonly referred to as “PPE”, is equipment worn to minimize exposure to a variety of hazards. Examples of PPE include such items as gloves, foot and eye protection, protective hearing devices (earplugs, muffs) hard hats, respirators and full body suits. This course will outline the most common forms of PPE used in the workplace.

  • Purpose
  • Hazard Assessment form
  • Hard Hats
  • Eye Protection
  • Hearing Protection
  • Foot Protection
  • Gloves

Job Safety Analysis

Course Description

A job hazard analysis is a technique that focuses on job tasks as a way to identify hazards before they occur. It focuses on the relationship between the worker, the task, the tools, and the work environment. Ideally, after you identify uncontrolled hazards, you will take steps to eliminate or reduce them to an acceptable risk level. This course outlines the basic steps of a Job Safety Analysis.

1. Job Safety Analysis

  • What is a JSA?
  • Why Have One?
  • Parts of the form
    • Task
    • Hazard
    • Control

 Controlling Hazardous Energy Course .5HR

Course Description

This training program covers Lockout/Tagout procedures for the use of appropriate lockout or tagout devices designed to isolate or disable equipment in order to prevent unexpected start up or release of stored energy, causing injury to employees.

  • Importance of lockout/tagout
  • Employees:
    • Authorized
    • Affected
    • Other
  • Energy sources disabled:
    • Plug boxes
    • Fuse locks
    • Breaker switch locks
    • Valve/pipe donuts or chains
  • Tags
    • Requirements
  • Group lockouts
    • Tags
    • Boxes
  • Stored energy release
  • Account for tools and replace guards

Fire Safety Course .5 HR

Course Description

This course highlights standards related to fire safety, including prevention, types of fires, extinguishers and best practices.

  • Prevention
  • Extinguishers
    • classifications of fire
    • types of extinguishers
    • maintenance and service
    • limitations
  • Operating extinguishers
    • PASS

 Bloodborne Pathogens CE .5 HR

Course Description

Bloodborne pathogens are infectious microorganisms in human blood that can cause disease, and be easily passed from one person to another. This course will outline the basic precautions every person should observe when working in a workplace where accidents can occur.

  • Introduction
  • Other Potentially Infectious Material
  • 5 Primary BBBs
    • Hep A
    • Hep B
    • Hep C
    • AIDS
    • HIV
  • Universal Precautions
  • PPE
  • Clean-Up/Disposal

Tool Box Talks

In this section you will be able to access:

  • 24 Toolbox Talks